You might be wondering how to apply rolled roofing shingles to your home. The process is actually quite simple, if you have the right tools and supplies. When I decided to take up the task of installing asphalt shingles on my home’s roof, I knew that I needed all the help that I could get.
I did a lot of research before I decided on the best used products in asphalt roll roofing. What impressed me the most was how affordable the materials were. It turned out that they were also very durable. One of the best used products in asphalt shingles is called Pinnacle Shingles.
If you are wondering how to apply Pinnacle Shingles, you will need to have an asphalt base to make sure that your asphalt shingles stay on the roofing. Start by measuring the distance between your house’s two corners. This will be your asphalt roll measurement. You will then want to measure how far along the roof the asphalt must be laid.
There are many choices when it comes to asphalt roll roofing materials. You have roller roofing materials and other types of shingle materials. You can also choose to purchase the materials already cut to size. One important thing to remember when choosing asphalt shingles is to get rid of any loose shingles. This would not only cause a safety risk during installation, but it would allow moisture to get underneath and damage the roof.
Your next step on how to apply Pinnacle Shingles would be to identify a good quality piece of plywood or sheet metal that you can use as a backstop. Make sure that the plywood or sheet metal has a double side and is slightly angled so that it is flat against the asphalt roll roofing materials. Once you have your backstop material, mark a line from one corner to another and center it. This is the best used for marking where the roofing nails will be located.
The final step on how to apply rolled roofing is to nail the edges using nails of the appropriate size. Make sure that the nails are flush with the edges of the roofing materials. Use roofing nails that are flexible, especially if you live in areas that receive high winds. Nail the entire row at this point. You should have an unobstructed row of nails for the rest of the row.