How to do metal roofing is a question a lot of people ask every day. If you have an understanding of what metal roofing is and its benefits, you’ll probably want to know how to do it yourself. This type of roofing can be installed by almost anyone with some basic tools and the proper set up for your specific roof. Metal roofing is by far one of the strongest roofing materials you can choose to install. However, choosing to attempt to install it on your own is probably not your wisest decision, you’ll need all the proper tools, not to mention just the right skill needed.
The first thing you need to do is to gather the basic tools that you would find handy when installing any type of roofing, such as a hammer, chisel, tape measure, level, stud finder, pencil and paper. Once you have gathered these items, it is time to start thinking about your metal roofing project. The first step in this process is to measure your roof, making sure to leave a few inches around each corner and door where you plan on installing your metal sheets. The next step is to figure out where you want to place your metal sheets. You will probably want to place them in a location that is closest to where you plan on installing them, but make sure that if you are doing this that you have room left in your budget to accommodate for any mistakes.
Now that you have your measurements, you are ready to get started on your how to do metal roofing project. You will need to remove any loose dirt or debris from your roof so that the metal sheets can be laid atop your existing roof. Most metal roofing kits come with roofing tar paper and protective roofing paint, which should be used to cover any exposed nails or metal shingles. Make sure you cover all areas that may potentially get damaged by the application of the tar paper or roof paint.
Once the roofing tar paper is applied and dried, it is time to install the metal roofing panels. Start by positioning the corrugated panels in the location that was determined earlier for your planned placement. Make sure the corrugated panels are positioned so that the weight of the roofing sheets does not stretch the corrugated metal when it is applied to the roof. As you nail or screw the corrugated panels to the roofing sheets, make sure that the nails are placed parallel to the edges of the corrugated panels. This will ensure that the panels are held firmly in place once they are secured to the roofing sheets. If you have any doubt while you are installing the corrugated panels, you can simply practice a few laps around your home until you feel comfortable with securing the panels to the roof.
Once the corrugated metal roofing panels are installed, you need to use roofing felt to fill in the gaps where the corrugated metal panels might go. Once the felt is in place, you should paint the felt using latex paint. You can purchase latex paint at any home improvement store. Once you are done painting, you need to allow the painted areas to dry before adding roof shingles to the top of the corrugated panels.
These are the main steps in how to do metal roof installation. The final step is to use roofing nails and screws to attach the corrugated metal panels to the roof. You can easily complete these steps yourself if you have enough time, but you may want to hire a professional to take care of roofing issues such as the installation because doing it on your own can be dangerous.