How to Do Roofing Shingles

how to do roofing shingles

How to Do Roofing Shingles

The process of learning how to do roofing shingles is not difficult. It’s just a matter of learning the right tools and skills that are required for a successful job. If you are thinking of trying to do it yourself, you should know that you will need to purchase all of the materials. This includes roofing nails or screws, roofing tar paper, roofing cedar wood strips, roofing felt paper, roofing limestone shingles, shingle roofing sheets, and roofing flashing.

After you have purchased all of these materials, the next step in learning how to do roofing shingles is measuring the roof. You should start by nailing small pieces of asphalt shingles to the roof using a nail gun. Use a similar technique when you are installing the larger shingles. Take your time and be patient, because if you get it wrong, you could seriously injure yourself.

You should now have a very good idea of how long each shingle should be. You will also need to decide where you want to place the nails or screws. Place the nails at least four inches apart. Nails can get caught up in the shingle, so make sure to measure carefully. Once you have the nails and the length of the shingles placed, you can then nail or screw them onto the asphalt shingles.

The third step in learning how to do roofing shingles is putting on the roofing cedar wood strips. Most people use screws when attaching these strips to the roof. You should first put the nails in very careful positions so they will be hidden when you are attaching the strips to the roof. Keep in mind that you will probably have to reposition the cedar strips several times before they are securely held onto the roof.

After you have all of the cedar shingles mounted and secured to the roof, you will want to nail the top row of nails all the way down to the first rafter. Then, you will take the remaining shingles and nail them to the other rafters at their distance from the first row of nails. Repeat this process until all of the shingles are installed. After you are done, you can then attach the attic cap to the rest of the roofing. Be sure to anchor your ladder to the side of the attic so that you don’t walk off when carrying your tools upstairs.

The last step in learning how to do roofing shingles is to line the exposed areas with tar paper. This is just to keep any water away from the exposed nails. When you are finished, you should have a pretty solid roof on your house. Just be sure to check in the attic regularly for leaks. You never know when one might develop.