How to Do Roofing Step by Step

how to do roofing step by step

If you are considering reroofing your home, it’s important to know how to do roofing step by step. While the process is not easy, it’s definitely doable for the do-it-yourselfer. You need to follow the proper procedures, as well as best practices. Here are some helpful tips. First, get yourself in shape. Practice climbing ladders and carrying a bundle of shingles.

To build the gable-to-gable roofing system, you need to measure the height and width of the top of the roof. Divide these two measurements by 35. You’ll then need to multiply the sum of these two measurements by three to determine the number of bundles you’ll need. When you have an accurate measurement of the area of the roof, you’ll know how many bundles of roofing material you’ll need.

Regardless of what material you choose for roofing, it’s important to know how to properly lay the underlayment. This material is similar to tar paper, but it uses asphalt instead of tar. The primary purpose of underlayment is waterproofing, so be sure to lay it up to four inches of ridge. Then, use roofing nails to secure the layers. By following these steps, you’ll have a roof that looks professional and lasts a long time.

The first course is the starter course, also known as the strip. It’s comprised of three-tab shingles and should extend beyond the drip edge. It serves to protect the roof and fill in gaps under cutouts and the first row of shingles. Once the starter course has been installed, apply the next two courses, overlapping them each other and nailing them with a nail gun. Once you’ve finished laying down the starter course, you can start putting on the shingles.

Next, determine the size of the battens. Battens should fit the roof tiles correctly. You can use a chalk line to determine this size. Make sure the battens are evenly spaced and are secured with nails in every rafter. Once you’ve installed the shingles, the next step is to add battens. If you’re going to add a ridge, you should install battens every six feet to the right.