How to Install Corrugated Plastic Roofing – Installing Plastic Shingles

how to install corrugated plastic roofing

How to Install Corrugated Plastic Roofing – Installing Plastic Shingles

One of the best ways on how to install corrugated plastic roofing is done through roofing installation kits. They are actually very easy to use and you will not require any special skills when it comes to installing them. You don’t have to be concerned about the tools since they are provided in the package itself, aside from a drill and screwdriver for making a secure attachment of the corrugated plastic sheets. These roofing kits can be acquired from hardware shops and home depots around your place.

Once you have acquired these materials, it is now time to set up the corrugated roof panels. Before you do so, make sure that the panels are aligned correctly or else they will cause trouble in the future. To determine the alignment, mark the spots where you would like to place the beams. This would also help you decide which materials you would need to make these beams. You may opt to purchase ready-made ones, or you may do it yourself by purchasing the materials and doing the construction yourself.

Once you have planned where to install the roof panels, start with the base. You will need to excavate the area for your corrugated plastic roofing by using a hydraulic excavator. You have to dig down to at least one foot below the surface. For the installation process, it would be best if you hire a contractor who is adept with this kind of work. This is because you have to ensure that there is no damage caused to the underlying structure when you are doing the installation.

The next step on how to install corrugated plastic roofing is fixing the corrugated sheet over the base and stapling them together. You need to anchor them using steel ties. After doing so, you can continue with stapling the roofing panels together. Make sure that they are aligned correctly. When you are checking their alignment, use a measuring tape to measure how far the distance between the roof and the walls are.

Once you have aligned them properly, you can proceed with the corrugated plastic panels. Make sure that you get them snapped tightly without gaps between them. You have to determine how high you want the roofing to be. Once you have decided on the height, you can go ahead and stick the corrugated sheet on the corrugated plastic. Use roofing cement to make the panels stay in place.

When you want to know how to install corrugated plastic roofing, there are a lot of steps involved. These steps are what you have to follow carefully to complete a job properly. The first step would be the laying of the corrugated sheets on the roof. The next step would be the attaching of the corrugated plastic panels together. Finally, you will have to measure and install the roofing shingles and nailing them onto the corrugated plastic sheets.