How to Install Roll Roofing
The first step in installing roll roofing is to measure your roof. If you’re a novice, ask a friend or family member to help you. A square or rectangular roof is easier to measure and will require you to multiply the length and width of the roof by two. When installing roll roofing, you should place nails about an inch from the edges. After that, place a layer of roofing cement and level the sheet before attaching the edge.
Once the base layer of the roofing is secured, apply a coating of roofing cement to the roof. Use a 2-inch-wide strip of roofing cement to keep it in place. Align the bottom edge of the second column with the horizontal line. This is the area where you want to apply roofing cement. You should nail the edges of the second column 6 inches apart and about 1 inch away from each other. Repeat this process until you’ve finished all the columns.
The next step is to place the second layer of roll roofing. The second layer should be 32 inches above the first layer. Make sure to measure and mark the overlapping strips. Lay the second layer of roll roofing, ensuring that it covers the entire roof. The last step is to secure the top layer with nails. Using a nail gun, nail the first layer and the second layer together. This will prevent any overlap between the two layers.
The next step is to apply roofing cement to the roll roofing. The cement should be applied to the edge of the roll to secure it. Once the roof is level, you should then start installing the second layer. If you have a flat roof, you should place a 36-inch roofing over it. Then, you can secure the second layer with another hammer. Then, you should attach the drip edge to the roof deck. Once the drip edge has been attached, apply the third row of roll roofing, parallel to the first. You can use a chalk line to ensure that the rows are even and overlap by three inches.
After securing the roof, you can attach the drip edge of the roll roofing. Then, you can continue attaching the rest of the roll roofing. After that, you must secure the overlapping strips with the roofing cement. Then, you should affix the first layer to the sides of the roof. The last layer should be about 6 inches longer than the first layer. A few inches overlap the ends of the roll roofing.
The last step in installing roll roofing is to install the roof. You should follow the instructions carefully to avoid any damage. The material should be properly measured, and you should use a hammer to ensure that the seams are straight and that no overlapping is visible. If you are a beginner, the best option is to hire a professional to do the job. This way, you can save money and have a beautiful roof that fits your home perfectly.