How to Install Roofing Felt

Before installing roofing felt, you need to prepare the roof properly. You need to ensure that the surface is dry and a solid one. It should also be clean and free of any debris. It is also important to remove any old material and nails from the roof. Once the roof is ready, begin laying down the roofing felt by following the instructions below. You should also be sure to protect yourself from any open flames when working on your roof.

how to install roofing felt

Start by laying down the first layer of roofing felt on the roof. You will want to align the edges with the rake to ensure a proper fit. Once the felt is rolled out, place five nails in the top right corner of the roof. Roll out the second course of the roofing and repeat the process. Make sure that you use nails that are long enough to penetrate the two layers of the felt. Otherwise, you’ll risk having leaks.

Once the felt is ready, you can move on to the next step. Depending on the size of your roof, you may need to hire someone to help you install the roofing. Remember to do the job when it’s not raining. If the weather forecast is cloudy, you can start the installation work during the day. If you’re unsure about how to install roofing felt on your roof, consult a professional and be sure to follow the directions.

Next, roll out the roofing felt. Then, align the rake edge with the edge of the roof. Then, roll the felt upward so that it covers the entire roof. To install the second course of roofing, you’ll need to align the edges of the first course with the rake. Once you’ve completed this step, you’ll need to position the third course in the same manner. Afterward, you’ll have to work on the first course of roofing to make sure that the tar paper covers the entire roof.

Then, you need to install the first course of roofing felt. To do this, you’ll need about 100 to 150 clout nails. You can also use plastic cap nails or simplex nailing nails. As you install the first course, you’ll need to use the same nailing pattern as the second course. If you’re using a roof rake, you’ll need around four to five different felt layers.

Once you’ve laid out the first course, roll out the second. Then, align the strip with the rake and place the second course below. When you’re finished, you should make sure that there are no rips or wrinkles on the first course. Moreover, the bottom part of the roof should be smooth. Finally, install the last section of roofing. If you have the right tools, the next step is to lay the nails.