How to Re Roof a House in a Few Easy Steps

You can learn how to re roof a house by following a few steps. First of all, it is crucial to measure the area. Typically, a single shingle covers one square foot. You can buy shingles in bundles of three and divide the total area by 100. After you’ve measured the area, you can buy the shingles accordingly. Alternatively, you can hire a roofer to come and do the job for you.

how to re roofing a house

To begin, get a free roof inspection from an expert. A free roof inspection will give you a good idea of the condition of your house’s roof. Once you know its condition, it is time to decide whether to re-roof your house or to hire an expert. Depending on your budget, you may need to hire someone to re-roof your house. However, you should not go ahead with the project without first hiring an expert.

Secondly, you must remove old shingles. This is important as it allows the contractor to check the condition of the wood beneath the old shingles. Installing shingles over the old ones wouldn’t reveal any rot underneath, so if you’re replacing wood, you should have it replaced. Once you’ve completed the task, install drip edge flashing along the eave. Once you’ve finished with the re-roofing, you can begin repairing your home.

Before you begin the project, it’s important to remove all the old shingles on the roof. This will allow the contractors to inspect the wood underneath. If you’re applying shingles over old shingles, you wouldn’t see the rot underneath, which will require replacement of the entire wood. Besides, re-roofing is an expensive process. Nevertheless, it can greatly increase the value of your house.

The first step in re-roofing a house is to make sure the roof is clean and dry. Once you’ve done this, you can hire a professional to replace the roof. It is best to hire an expert if you don’t want to worry about the work being done correctly. A free roof inspection will help you know if your roof is in good condition. If you’ve decided to re-roof your house, you can then proceed with the process.

Once you’ve determined the damage caused by the previous roof, it’s time to re-roof your house. Before you can re-roof a house, you must remove the old shingles. This is the only way to inspect the wood underneath. Otherwise, you won’t be able to tell if there’s rot underneath. If you’re planning to re-roof a home, you should consider the lifespan of each component of the roof.