How to Re-Roof a House

how to re roofing a house

If you are wondering how to re-roof a house, you are not alone. Many people face the same challenge. You may not be aware of the materials used to replace the roof and have no idea when it was last replaced. It can be confusing to try and do the job on your own, but there are some things you should know. Listed below are some tips to help you get started. After reading this article, you’ll know exactly how to re-roof a house.

Gather all the materials and tools needed for the job. You’ll also need to be comfortable working at heights. Ensure that you are physically fit and have the proper safety gear. The last thing you want to do is run out to a hardware store and discover that you are missing a vital tool. To be safe, make a checklist. After assembling all the materials, you can begin the roofing process.

Before you begin the job, you should measure the roof area. Normally, roofing shingles are sold in bundles, with three bundles covering one square. Divide the total roof area by 100 to get the number of bundles you’ll need. Once you’ve determined how many squares you’ll need, add the squares together to determine the number of bundles needed. Lastly, you should check the shingles for damage.

The cost of reroofing a house varies greatly. The amount you’ll have to spend depends on several factors, including the size of the house, the materials and labor required, and the location. Other factors to consider include whether you need special equipment, like roof jacks, for your house. Also, the slope of the house plays a role in how much you’ll spend on labor. Houses with two stories will require more time and effort to roof, and the costs will increase accordingly.

If you’ve gotten the green light from the building inspector, reroofing your house is a relatively straightforward project. It takes a few days, and it’s often cheaper than other home improvements. Remember though that a roof can only have two layers of shingles, so the final clean up will require approval from the building inspector. When hiring a professional for reroofing a house, make sure you hire an expert in the field.

Before you begin the process of re-roofing a house, it’s important to know how to protect yourself from flying shingles and dangerous debris. If you plan to work in an area where you can fall, a safety harness is a must. In addition to safety gear, you’ll need to wear protective eyewear when working in the roof area. If you’re working in a high-rise building, you should also wear a safety harness.

Once you have completed the reroofing job, the next step is to install new flashing. This flashing is available in different sizes and shapes, and you can either use pre-made or flat flashing. Some roofers salvage old flashing and reuse it on their new roofs, but if the flashing is worn and needs replacement, you should replace it. Finally, chalk lines should be drawn at 6 inches apart, and they should be used to ensure that the course lines for shingles remain straight.