What Is a Square in Roofing Shingles?

what is a square in roofing shingles

To learn what is a square in roofing shingles, start by determining how much space your roof covers. Each square is made up of one or more bundles. To find out how many squares you need, divide the total square footage by 100. This should give you the number of shingles required for the square of the roof. The manufacturer of asphalt shingles sets a limit on the weight of each bundle. The number of bundles needed depends on the square footage and the construction of the roofing tabs.

Roofing squares are typically 100 square feet. Roofing contractors, manufacturers, and suppliers measure the amount of material necessary to cover a roof in square feet. To calculate the squares needed for your roof, start by measuring the square footage of your roof in square feet. Next, divide the square count by 100 to calculate the number of squares you need to cover the area. The more squares you need, the more expensive your roof will cost.

If you are unsure how to calculate your roof’s square footage, take a photo of the roof and measure the side edges. Measure the length of each side of the square. Then, multiply this measurement by 100 to get the total square footage. Then, factor in the pitch of your roof. The higher the pitch, the more roofing squares you’ll need. A square is one-third of the total square footage.

In general, a roofing square is equal to 100 square feet. The square does not have to be perfect, but it’s a good way to figure out how many bundles of shingles are needed to cover the roof. It’s also a quick way to estimate how many bundles you’ll need. Remember to include the number of bundles, because roofing shingles are 12 inches wide. It may take more than 80 shingles to cover a square of 100 square feet.

When buying shingles, it’s helpful to understand the shingle’s square measurement. This is important because squares are not necessarily uniform and require a professional to install them. The square measurement refers to a larger unit of measurement that provides a standard measurement. Ten square feet of roof coverage is one square, so if you plan to install shingles over a 10-foot-square, make sure you understand the square measurement before purchasing your new shingles.

When buying shingles, make sure to read the package labels carefully. The number of bundles per square will be listed on the package. For instance, you’ll need 80 bundles for a 2,000-square-foot gable roof, and each square is three bundles. A few other factors that will determine the number of bundles you need will be important for estimating the cost and the amount of waste during installation.

The best way to calculate a roof’s square footage is to measure each plane. For a roof that is rectangle-shaped, you can multiply length by width to find the square footage. Then, add up the squares for each plane. This calculation may be too risky for you to perform safely. If this is not an option, you can estimate the amount of bundles you need by measuring the length of the building from the ground level and the rake-edge overhangs.